Ferro Products

Ferro Molybdenum is an alloy which is formed by combining iron and molybdenum. Ferro Molybdenum is a hardening agent and is found in many alloy steels that are heat-treatable. Ferro Molybdenum prevents corrosion in stainless steels, and when mixed with iron, it also strengthens and hardens into austenite. Ferro Molybdenum comes in many grades, although predominantly it is produced in just two grades (one for US and one for EU) where the content of pure molybdenum is between 60% and 75%.

Size : 10-100mm or as required

Melting Point : 1900^oC

Properties of Ferro Molybdenum
Ferro Molybdenum is an additive to the production process of amorphous metals and will impart several desirable properties into the new alloy. One of the primary benefits of adding Ferro Molybdenum to an alloy is its hardening properties that makes steel extremely strong and at the same time weld able, as Molybdenum is one of the top 5 melting-point metals. Additionally, the adding of Ferro Molybdenum to an alloy can increase corrosion resistance. Properties of Ferro Molybdenum make it suitable for a variety of protective films over other metals.

Ferro Tungsten is an alloy, which is formed by combining iron and tungsten.Ferro Tungsten is a remarkably robust alloy because of its high melting point, tungsten has the second highest melting point after carbon. Ferro-tungsten is a master alloy for the production of tungsten-containing steels.

We offer qualitative Ferro Tungsten that is widely used as a tungsten additive in the process of steel smelting and other alloy materials.

Properties : Adding Ferro Tungsten to an alloy distinctly increases its melting point, which makes it very useful in aerospace applications and in welding. It also increases the hardness of the alloys without increasing its breakability, and increases electrical conductivity.The product is stable under normal conditions. It hides any risk of explosion in its original form. In the form of fine dust, there is a small but greater risk of explosions, but low positive pressure eliminates any danger of explosion. It may react with acids to produce flammable gas or hydrogen.Its preparation is not classified as dangerous according to the relevant European regulations, and it is also not classed as a hazardous good for transportation.

Chemistry Applications Ferro Tungsten has great hardening and conductive properties and is used to increase the abrasion resistance and strength of special steels.

Details :

• Size: 10-100 mm
• Ferro Tungsten melting point range : 1650 - 2100^oC

Uses

• The uses of Ferro Tungsten include :
  
  • The manufacturing of high speed steels.
  • The manufacturing of tool steels.
  • The manufacturing of structural steels.
  • The production of super alloys.
  • Its use as a shield for military applications.

Ferro Vanadium was primarily recovered from titanium-bearing magnetite ore processed to produce pig iron. The process produces a slag containing 20% to 24% vanadium pentoxide, which can be further processed to ferrovanadium containing 40% to 50% vanadium. 84% came from ferrovanadium and nearly all of it (99%) went into steel manufacturing. The Ferro Vanadium is used as an alloying agent for the metals iron and steel and also aerospace.

Size : 10-100 mm or as required

Melting Point : 1900^oC

Application
The most important use of vanadium is as an additive for steel.  It is used for the production of rust resistant, spring and high speed tool steels. It is also added to steels to stabilize carbides. Vanadium foil is also used to bond titanium to steel. Due to its low fission neutron cross section vanadium is also used in nuclear applications. The Ferro Vanadium is used as an alloying agent for the metals iron & steel and also aero.